Home » How To Clean An Immersion Blender

How To Clean An Immersion Blender

This post may contain affiliate links. Read my full disclosure here.
upright white immersion blender
Immersion Blender: Stick blender, hand blender

What is an immersion blender?

An immersion blender, also known as a stick blender or hand blender, is a type of kitchen appliance that is used to blend ingredients in a liquid form. It is held directly in the pot or bowl and does not require any extra attachments. This makes it an extremely convenient tool to have in the kitchen to make sauces, soups, and other blended items.

Cleaning an immersion blender is a bit tricky since the blades are so close to the food. You want to make sure that you get all of the food particles off of the blades to avoid bacteria growth.

There are two pieces to an immersion blender – the blending wand and the motor base. The blending wand should be cleaned first by rinsing it off with hot water. There are many cheap cleaning products that you might find useful to clean the blender. As those areas might be hard to clean off with a scrubber, scrubbing with a toothbrush soaked in dish soap could help brush the dirt off the narrow regions like the blades but make sure that you are careful not to cut yourself..

The motor base is a little bit trickier to clean because there are more nooks and crannies. You can either use a brush or a toothpick to get into all of the crevices. Be sure to rinse it off with hot water as well.

Thyme & Joy’s Top Pick

How To Clean An Immersion Blender (Step By Step)

  1. Fill a pot or bowl with warm water and add some dish soap.
  2. Place the blending wand in the water and let it soak for a few minutes to help loosen up any stuck food or sauces.
  3. Rub all of the food particles off of the blades with a sponge very carefully.
  4. Rinse the immersion blender under running water to make sure all of the soap is removed.
  5. Plug it in and turn it on to the lowest setting over the sink to dry off any excess water.
  6. Dry the immersion blender with a towel to make sure any excess liquid is removed and dried.
  7. To clean the motor base, wipe it down with an antibacterial solution or wipe. Use a toothpick or toothbrush to clean any hard-to-reach crevices. Make sure the blender is not plugged in and that the base does not get soaked in water.
  8. Store the immersion blender in a safe place.
dirty immersion blender blades

FAQ

Can I put my immersion blender in the dishwasher?

Immersion blenders should not be placed in the dishwasher. However, some of the blade wands are dishwasher safe. Check the model manual.

Can I submerge the entire immersion blender in water to clean it?

It is not recommended that you submerge the entire immersion blender in water as this could damage the electrical components. This can prove to be dangerous, especially when you plug the immersion blender back into power–it may malfunction and disrupt your home’s electrical systems, and as these experts will tell you, always unplug and be sure to keep electrical cords away from water! To avoid all this, only submerge the blending wand into water and make sure that the motor base is dry.

What if there is food stuck on the blades that won’t come off?

If there is food stuck on the blades that will not come off, you can try using a toothbrush to help scrub it away. Be very careful when doing this so you do not cut yourself. You may also want to consider taking the immersion blender to a professional cleaner.

how to clean an immersion blender
Print Recipe
5 from 2 votes

How To Clean An Immersion Blender

Do you own an immersion blender? If so, you know how convenient they can be! However, they can also be a bit tricky to clean. Here are the step by step instructions for How To Clean An Immersion Blender that will help keep it in good condition and prevent any bacteria from growing.
Cook Time5 minutes
Course: How To Clean
Cuisine: American
Keyword: immersion blender

Equipment

  • 1 Immersion Blender motor and blending wand

Instructions

  • Fill a pot or bowl with warm water and add some dish soap.
  • Place the blending wand in the water and let it soak for a few minutes to help loosen up any stuck food or sauces.
  • Rub all of the food particles off of the blades with a sponge very carefully.
  • Rinse the immersion blender under running water to make sure all of the soap is removed.
  • Plug it in and turn it on to the lowest setting over the sink to dry off any excess water.
  • Dry the immersion blender with a towel to make sure any excess liquid is removed and dried.
  • To clean the motor base, wipe it down with an antibacterial solution or wipe. Use a toothpick or toothbrush to clean any hard-to-reach crevices. Make sure the blender is not plugged in and that the base does not get soaked in water.
  • Store the immersion blender in a safe place.

Similar Posts

5 from 2 votes (2 ratings without comment)

Leave a Reply

Your email address will not be published. Required fields are marked *

Recipe Rating